 |
| SEARCH OUR STORE |
|
|
Chartplotters / GPS
Multifunction Displays
Sonar Systems
Sonar / GPS Combos
Radar Systems
VHF & SSB Radios
AutoPilots
Panel Instruments
Marine Audio / Video
Handheld GPS Units
Transducers
Antennas & Radomes
Trolling Motors
Turning Point Propellers
Marine Safety
Magnetic Compasses
Riggers & Rod Holders
Power Chargers & Inverters
Charts & Software
Trim Tabs
Anchors
Metal Detectors
Plumbing
Accessories
|
Home > Radar Systems > Furuno 1932MK2 Radar System
Furuno 1932MK2 Radar System | 
|  | | | |
Engineered for 30'- 65' boats, the Furuno 1932MK2 Radar System offers exceptional power, target detection and reliability. Featuring Furuno's custom microwave IC receiver design, this radar has a 10" diagonal CRT daylight-bright display with eight-level quantization. Plus, it's packed with high-speed micro-processor technology and features that help you identify what's out there. And like other Furuno radars, it can be inter-connected with other nav equipment, chart plotters and even sounders, through Furuno's programmable NMEA 0183 interface system. The 1932MK2 comes with a 3.5' open array antenna.
| 10" Mono CRT |
3.5' Open Array |
48 n.m. |
4 kW |
2.4 degrees |
Standard Features
- High Resolution, Non-Glare 10 Inch CRT Display
- 4.0 Kilowatt Transmitter Unit
- Up to 16 User Selected Range Scales from 1/8th to 48N.M.
- User Adjustable Duplex (In or Out) Radar (Guard Zone) Alarm
- User Selected Time of Echo Trails for Target Threat Assessment
- Automatic or Manual Tuning Receiver
- 6db Noise Factor Logarithmic Receiver
- Three Modulator Pulse lengths and Repetition Rates
- Programmable F1 and F2 Keys for Optimized Radar Picture
- Automatic or Manual Control of Rain Clutter (FTC)
- Automatic or Manual Control of Sea Clutter (STC)
- Waypoint Lollipop Navigation Aid Overlaid on Radar Picture *
- Power Saving Watchman, or Sleep Mode for Safety at Anchor
- Multi-step Interference Rejecter and Echo Stretch to Enhance Picture
- 100% Picture Off-Centering or 2 x Target Area Zoom
- Two VRM's and EBL's for Rapid Target Data, one may be Offset
- Course-up, Head-up, North-up or True Motion Display Modes **
- Navigation Data Display in Standby *
- Automatic Video Level Adjustment (up to 8 Levels)
- Target/Cursor Position and Output to Plotter, using TLL Key *
- Optional ARP10, 10 Target ARPA **
Power Requirements
- 12 or 24/32 VDC, 52 Watts, Fuse Change Required
- 28 Watts in Power Economy, Standby or Watchman Mode
Notes
1. * Appropriate Nav Data Input Required.
2. ** Appropriate Compass and Nav Data Input, Required.
|
|
|
