The Katadyn PowerSurvivor-160E model offers the same reliable performance as the 80E, with nearly double the output. It's a great choice for larger crews.
Simplicity - The 160E is the easiest to maintain of any product at this output level. Periodic maintenance can be performed with only a few common tools and easy to follow instructions. Simple to install, operate and maintain.
Compactness - The 160E is very compact. With separation of the membrane module and the pump/motor unit, the 160E can fit into even the tightest of spaces.
Efficiency - Using the patented Energy Recovery System, the 160E produces copious amounts of water with low energy consumption.
Durabilty - The 160E uses 316 stainless steel for pump housings. As with all of our models, they are covered by the best warranty in the business: 3 years on most components.
Specifications
The PowerSurvivor-160E delivers an impressive 6.7 gallons per hour with the simplicity of the smaller systems.
- Power Requirements: 12 volts DC (draws 18 amps)/24 volt DC (draws 12 amps)
- Water Production (+/- 15%): 6.7 gallons/hour (25.4 liters/hour)
- Weight: 36 lbs (16.3 kg)
- Pump Dimensions:
- Height: 6" (15.2 cm)
- Length: 16" (40.6 cm)
- Width: 14" (35.6 cm)
- Membrane Module Dimensions:
- Length: 25" (63.5 cm)
- Diameter: 3.5" (8.9 cm)
- Prefilter Module Dimensions:
- Length: 12" (30.5 cm)
- Diameter: 6" (15.2 cm) (allow 7" (18 cm) for hose bend)
- Feedwater Flow Rate: 80 gallons/hour (302.8 liters/hour)
- Salt Rejection: 98.4% average (96% minimum)
- Hand-held Salinity/TDS Meter: Standard
| 
