Simply dial in your destination and press auto! The all-new Raymarine ST8002 SmartPilot Autopilot Control Head puts total helm control at your fingertips with an easy-to-use rotary control for precision course changes and convenient power steering control. The oversized 4" LCD display delivers large high contrast characters of pilot status, compass heading and user defined data pages, transforming the ST8002 into a versatile navigation instrument repeater display.
NOTE: ST8001 is replaced by ST8002, which is designed to match new panel instruments.
ST8002 Features
- Large 4" high contrast LCD display with easy-to-read rudder angle indicator
- Simple setup and calibration with AutoLearn when used with G series corepacks
- A versatile data repeater with 15 configurable instrument/navigation data pages
- Programmable AutoTack control
- Available in convenient preconfigured complete SmartPilot System Packs (with corepack and drive unit) for Sail and Powerboat applications
- Compatible with all SmartPilot corepacks and drive units
General Specifications
- Advanced AST software with integral rate gyro* for exceptional steering performance
- AutoLearn software* for easy set up
- SeaTalk and NMEA integration
- Displays current and locked heading, COG, SOG, BTW, DTW, TTG
- Repeats MOB and shallow water alarms from SeaTalk compatible devices
- Optional full function ST600R handheld remote control
- Multi-station capability. Simply connect additional control heads with SeaTalk cabling
- AutoSeastate with adjustable response levels, autotrim, autotack/turn
- Fast heading data* for MARPA and radar/chartplotter overlay
- Large display of rudder angle/course or cross track error
- Dedicated buttons for track mode, Response levels, resume and set course
- * = When used with G Series Corepacks
Technical Specifications
- Connections SeaTalk, NMEA 0183
- Control Unit dimensions width height depth 175 mm (6.9 in) 115 mm (4.53 in) 41 mm (1.62 in)
- Environmental waterproof to CFR46
- Interfaces NMEA 0183 and SeaTalk
- Keypad 9 button illuminated keypad with rotary course change control
- Liquid Crystal Display (LCD) Displays heading, locked course and navigational data, data pages. Three brightness levels + off
- Operating temperature Control Unit:0 °C to +70 °C (32 °F to 158 °F) Drive unit: 0 °C to +60 °C (32 °F to 140 °F)
|
